Equipment

Basic model of hood with bag. The ergonomic body is designed for the client’s two hands and has anti-slip feet. Suitable for experienced professionals with a large client flow. The operating mode is regulated by the regulator on the cable. It has a metal grill; if necessary, you can install an additional mesh that will protect the fan from foreign objects getting inside. The power is 45 W, but due to the energy-efficient fan, its power is equal to 65 W. Size: 28 x 30 x 15 cm Retraction capacity: 344 cubic meters. at one o'clock RPM: 3000 Noise level: 34 dB

ÜLKA X2F Premium Extractor hood with HEPA filter - will keep the master's workplace clean. The convenient design will provide comfort for hands of clients. The case is made of impact-resistant plastic. The hood has special rubber anti-slip feet. These hoods are equipped with centrifugal fans that operate with high performance, but less noise and less power consumption. The service life of 50,000 hours is about 6 years of continuous operation! It is very productive, so it is ideal for craftsmen working with even the most volatile material. The size of the tripod base is 29.5x33.5 cm. The height of the stand is adjustable from 45 to 90 cm.

Sisseehitatud maniküüri tolmukoguja ÜLKA X2F B PREMIUM HEPA-filtriga - hoiab teie töökoha puhtana. Mugav disain tagab klientide kätele mugavuse. Korpus on valmistatud löögikindlast plastikust. Kapuutsil on spetsiaalsed kummist libisemisvastased jalad. Need kübarad on varustatud tsentrifugaalventilaatoritega, mis töötavad suure jõudlusega, kuid väiksema müratasemega ja väiksema energiatarbimisega. Selle eluiga on 50 000 tundi - see on umbes 6 aastat pidevat kasutamist! See on väga produktiivne, seega sobib see ideaalselt käsitöölistele, kes töötavad isegi kõige lenduvamate materjalidega. Kasutamise lihtsustamiseks on toitenupp korpusest eraldi. Meie kübarat kasutades ei jää teie töölauale mitte ühtegi tolmukübeme!

FEATURES OF ÜLKA BEE The device body is made of impact-resistant plastic. The Bee hood has special non-slip rubber pads on the base. The ULKA manicure hood is equipped with an industrial centrifugal fan with dust protection. Fan service life is 50,000 hours. that's almost 6 years of continuous work Comes with installed HEPA filter and mask. The filter requires daily cleaning (clean it carefully with a dry brush). Hand wash with soap and air dry every 2-3 months. This is a high-performance device suitable for all nail technicians of all styles. The ÜLKA Bee air absorber has a rubber seal that prevents dust from entering the engines.

SPECIFICATIONS Dimensions of the sterilization chamber, (w/d/u), mm 150*240*300 Dimensions of the sterilization tray 235*295*27 External overall dimensions, (w/d/u), mm 550*400*260 Temperature deviation from the set value -1/5C Heating time to sterilization temperature, min 10-15 Maximum power consumption, kW 0.7 kW Sterilizer weight, no more, kg 17 Emergency shutdown: Yes Supply voltage:. 220 V Fan presence: Yes Reaches temperature for sterilization in just 10-15 minutes. Operates in three automatic modes + tool drying mode: 200 °C – 30 min, 180 °C – 60 min, 160°C – 150 min. 80 °C – 30 hvilin (drying)

Before using the lamp, remove the protective film from the bottom of the lamp to prevent overheating of the lamp! The new, improved, innovative SUNUV Original lamp now helps you save money. Consuming less power, the lamp remains as powerful as its predecessor. Technical details: LED Life: 50,000 hours Wavelength 365 + 405 nm. 36 LEDs. Power: 48 watts.

Holds 2 sets of instruments or 1 sterilization bag. Designed for horizontal loading only. The Microstop Mini sterilizer is a compact dry-heat sterilizer, so it is most suitable for small salons and private nail technicians, as well as for tattooists, piercers, eyebrow artists, cosmetologists and podiatrists. The sterilizer has automatic control. The digital display of this sterilizer clearly shows the temperature and sterilization time.

Microstop Compact - is a high-temperature dry-heat sterilizer. The most productive sterilizer among compact models. Suitable for small beauty studios and private nail technicians, as well as tattooists, piercers, eyebrow artists, cosmetologists and orthopedists. Can simultaneously sterilize 2 sets of instruments without kraft bags or 3 kraft bags with instruments arranged vertically in the sterilization chamber. Has automatic control. Its digital display shows the temperature and sterilization time.

Microstop Optimal - is an ideal sterilizer for medium-sized nail studios and beauty salons. Suitable for both beauty salons and private nail technicians, as well as tattooists, piercers, eyebrow artists, cosmetologists and orthopedists.

MICROSTOP MAXI high-temperature dry sterilizer. Holds 6 sets of instruments or 9 sterilization bags. It is designed for horizontal and vertical loading. Microstop Maxi - has automatic control and is operated with a push button.

LED lamp for polymerization of gel tips. PRODUCT PARAMETERS: Lamp power: 27W Working time (fully charged): 6 hours Charging: USB (cable, without plug) Connect the cable to a free USB port to charge the lamp. Turn on the lamp with the ON/OFF button.

The JD308 35W Mobile Cordless Manicure Cutter is the ideal solution for people who work mobile, but not only. The milling machine is successfully used in stationary offices. It is characterized by quiet operation even at full speed of 30,000 rpm. The router has a built-in 2200 mAh lithium-ion battery, which allows it to work without a connected power source. Short charging time of 2-3 hours and long working time of up to 12 hours on a single charge, and LCD screen that allows you to easily adjust the "0-30" speed, greatly simplifies the operation. Suitable for professional use, nail salons or home use.

Manicure cosmetic device. Smooth and full adjustment in the range of 0 to 30000 RPM. TWIST-LOCK head - change mills in one move without the need for awkward keys and pins. The set contents: nail drill head nail drill base foot pedal head holder Specifications: power 45 W voltage 220-230 V / 50-60 Hz ergonomic construction right and left rotation switch and speed control in the adapter/ base smooth speed control in the range 1-30 thousand mill diameter 2.32 TWIST-LOCK handle (mill exchange with one move) digital overload protection EU CE standart torque 5.71 Ncm

Manicure cosmetic device. Smooth and full adjustment in the range of 0 to 30000 RPM. TWIST-LOCK head - change mills in one move without the need for awkward keys and pins. The set contents: nail drill head nail drill base foot pedal head holder Specifications: power 100 W voltage 220-230 V / 50-60 Hz ergonomic construction right and left rotation switch and speed control in the adapter/ base smooth speed control in the range 1-45 thousand mill diameter 2.32 TWIST-LOCK handle (mill exchange with one move) digital overload protection EU CE standart torque 3.0 Ncm low noise and vibration levels base weight: 1.6 kg base dimensions: 141 x 186 x 97 mm

Manicure cosmetic device. Smooth and full adjustment in the range of 0 to 30000 RPM. TWIST-LOCK head - change mills in one move without the need for awkward keys and pins. Head consisting of two parts (one part is autoclavable). The set contents: nail drill head nail drill base foot pedal head holder Specifications: power 100 W voltage 220-230 V / 50-60 Hz ergonomic construction right and left rotation switch and speed control in the adapter/ base smooth speed control in the range 1-40 thousand mill diameter 2.32 TWIST-LOCK handle (mill exchange with one move) digital overload protection EU CE standart torque 2.1 Ncm low noise and vibration levels