Liquid Light Acrygel - Lunamoon Nr 17 - 13ml

Lunamoon Liquid Light Acrygel is an innovative material for strengthening, leveling, and extending nails. It is a hybrid of polygel and base, consisting of 60–80% acrylic copolymer and 20–30% HEMA. It can completely replace the base layer in nail modeling.

• Polymerization wavelength: 365–405 nm
• UV/LED lamp power: 36–48W
• Coating thickness: up to 0.5 mm at the edge, 1 mm at the apex
• Acid-free formula with medium consistency
• Medium pigmentation – covers the free edge
• Full polymerization in 120 seconds
• Intended only for strengthening and extension
• Has excellent shock absorption properties
• For reinforcement, the natural nail must be filed
• Requires a Rubber Base Lunamoon underlay
• Can be preheated to reduce viscosity

Application: Strengthening
• Remove old coating.
• Do not file the shape – optionally leave 2 mm for later shaping.
• Lightly file the surface with a 220 grit file or use a 100 grit buffer.
• Perform manicure. If removers were used, wash hands with soap.
• Degrease nails with Lunamoon Nail Prep using 2-step method and 4 wipes (one per 5 fingers). First – wipe the surface. Second – wrap a wipe around a stick and clean cuticles and folds.
• (Optional) Apply Lunamoon Ultrabond with a semi-dry brush. Wait 1 minute.
• Apply Rubber Base with flat brush using rubbing motions. Cure 60 sec.
• Remove stickiness and level the gel, maintaining 0.5–1 mm distance from the cuticle. Cure 60 sec.
• Buff and file the edge to form structure. Remove dust.
• Apply gel polish if needed.
• Apply top coat and cure for 120 sec. Do not wipe.

Application: Classic Nail Extension
• Shorten nails to 1 mm and shape.
• Lightly file surface with 220 grit file or 100 grit buffer.
• Perform manicure. Wash hands if removers used.
• Degrease with Nail Prep using 2-step method.
• Apply Lunamoon Primer.
• Apply Rubber Base with rubbing technique. Cure 60 sec.
• Remove stickiness.
• Apply nail form and fill it with builder gel. Cure 30 sec.
• File and shape free edge. Remove dust.
• Reapply Rubber Base to filed zones. Cure 30 sec.
• Align with gel, place in lamp, and press 10–15 sec (20 sec if sticky).
• Cure 120 sec. Wipe tacky layer before polish.
• Apply top coat and cure 120 sec. Do not wipe.

Composition: Acrylic Copolymer 60–80%, HEMA 20–30%
For full ingredient details, please contact us.
(Product images on the website may slightly differ from the actual product.)