Builder gel F.O.X - Cover Peach

F.O.X Builder Gels are the ideal thick hard gel for nail modeling. They allow you to create a strong coating and correct nail architecture, easily building extensions of the desired length and shape. The material perfectly holds the arch and does not deform even after prolonged wear. The gel does not cause burning in the lamp, as it is a low-temperature system.

Builder gel is a three-phase modeling gel with a thick consistency. It self-levels slowly and does not spread, which is especially convenient for beginners.

Key features:
• Hard material
• Perfectly holds the nail arch
• Does not burn in the lamp
• Preserves a crisp smile line
• May become thicker and harder to apply at lower temperatures

Important:
– If you need a more liquid and faster self-leveling gel, choose Hard Gel.
– If you need a gel that holds a complex shape before curing, opt for Jelly Gel (not self-leveling).

How to use F.O.X Builder Gel:

1. Nail preparation:
    • Clean the nail with F.O.X Nail Prep to remove oils and moisture.
    • Use F.O.X Ultrabond acid-free primer to improve adhesion.

2. Base layer:
    • Apply a layer of elastic base (such as F.O.X Power Base or F.O.X Rubber Base) with rubbing movements.
    • Cure in a 36W UV lamp for 1 minute or in a 36/48W LED/UV lamp for 30 seconds.

Strengthening natural nails:
• Apply a thin first layer of builder gel, working it thoroughly into the nail surface.
• Cure: UV lamp – 1 minute or LED/UV lamp – 30 seconds.
• Apply a second layer to level and create a smooth surface.
• Cure: UV lamp – 2–3 minutes or LED/UV lamp – 2–4 minutes.

Nail extensions with Dual Forms:
• Choose the appropriate Dual Form for each nail.
• Fill the Dual Form with builder gel, spreading the layer evenly.
• Gently press the form onto the nail and remove excess gel from the edges.
• Cure in a UV lamp for 2–3 minutes or in a LED/UV lamp for 2–4 minutes.
• Remove the form and file the nail to the desired shape.

Nail extensions with paper forms:
• Place the paper form under the free edge of the nail.
• Apply a thin layer of builder gel to the natural nail and extend it onto the form to create the base of the desired length and shape.
• Cure: UV lamp – 2–3 minutes or LED/UV lamp – 2–4 minutes.
• Build the nail architecture with additional layers, curing each layer separately.
• Remove the form and file the nail to the desired shape.

After finishing, the nail is ready to be covered with gel polish or top coat.

Removal:
• Remove only by filing with a nail file or electric drill.

Pro tip:
• Keep your gel jar clean – make a small cut in the foil instead of removing it completely to prevent leaks and premature curing. Use the edge of the foil to wipe off excess material for a precise application!

Ingredients:
Acrylates Copolymer, Hydroxypropyl Methacrylate, Cellulose Acetate Butyrate, Dimethicone, Microcrystalline Wax, Hydroxycyclohexyl Phenyl Ketone, Mica, CI 15880, CI 77491, CI 77492, Zinc sulphide