Lunamoon Rubber Base - 13ml

RUBBER BASE is a transparent universal elastic base for nail leveling.

Features:

• Acidity: 3-4 pH.
• May provide minimal shrinkage during wear due to its elasticity.
• May generate heat and cause burning on damaged and very thin nails. Doesn’t cause burning on healthy nails.
• Suitable as an underlay for all types of coatings and for gel tip extensions.
• Medium consistency, self-leveling.
• Cure lamp power requirement: 36 - 48 W. It must be an original lamp only.
• The main rule for leveling is that the thickness should be 0.5 mm.
• Provides wearability without detachment for 3-4 weeks.
• Easily removed by filing or liquid.
• Suitable for standalone leveling on short nails.
• Hypoallergenic and has a neutral odor.
• Does not run and self-levels very quickly.

Application Method:

• Removal.
• Don’t file the nail shape. Alternatively, leave spare 2 mm in length, which will be filed and removed after leveling.
• Use a 220 grit file to gently file the nail from the top, lifting any nail plate flakes. Alternatively, use a 100 grit buffer.
• Manicure.
• If using removers, after their use, it is necessary to wash hands with soap and water.
• Degrease the nail with Nail Prep LUNAmoon. Two approaches are needed. Use 4 wipes. One wipe for 5 fingers. The first approach - wipe the nail surface, the second approach - take an orangewood stick, wrap it with a wipe, and wipe everything in the cuticle area and in the nail folds.
• Primer is optional.
• Underlay with Rubber Base LUNAmoon. Best applied with a flat gel brush. Strokes should be rubbing. It is important to outline all nail recesses. Cure for 60 seconds.
• Remove stickiness.
• Apply Rubber Base for leveling. Cure in the lamp for 90 seconds.
• Dust off the forms after leveling. This is necessary in order to create a trickness at the end that will hold the free edge.
• Since the nail was thin, it may curl. Therefore, it is necessary to file down 1 mm of the natural nail from the middle.
• After filing, remove the stickiness and apply gel polish or a thin layer or camouflage base.
• Apply top coat. Cure for 120 seconds. After curing, don’t wipe anything off, as it may dull the shine.

(Product photos on the website may differ from the actual product)

The product is intended for professional use.